HP TMS zl Module Security Administrator's Guide

4-328
Configuring a VPN on the HP TMS zl Module
GRE Tunnels
Table 4-37. Possible Named Objects for Client-to-Site VPNs
Figure 4-239. Example GRE Tunnel
Create a GRE Tunnel
Complete the following steps to create a GRE tunnel:
1. In the PCM+ navigation tree, expand Network Management Home > Agent
Groups > Default Agent Group > Devices > TMS zl.
2. It is important that you are at the correct level in the navigation tree when
you launch the Manage GRE wizard:
• To configure one TMS zl Module, select the module in the navigation
tree.
Example
Figure
Reference
Named Object Description Named Object Type Location Where the Named
Object is Specified
1 The TMS zl Module IP address
that acts as the local gateway for
the tunnel
Single-entry IP address object Source or Destination for firewall
access policies that permit GRE
traffic
2 The IP addresses of local
endpoints that use the tunnel
Single-entry or multiple-entry IP,
range, or network address
objects
Source or Destination for firewall
access policies that permit traffic
sent across the tunnel
3 The remote tunnel gateway’s
actual IP address
Single-entry IP, range, or network
address object
Source or Destination for firewall
access policies that permit GRE
traffic
4 The IP addresses of endpoints
behind the remote tunnel
gateway
Single-entry or multiple-entry IP,
range, or network address
objects
Source or Destination for firewall
access policies that permit traffic
sent across the tunnel