HP TMS zl Module Security Administrator's Guide

1-42
Managing TMS zl Modules
Configuring Authentication
d. To remove a selected module, highlight the module in the Selected
Devices list and click <<.
3. Complete the RADIUS configuration for the selected module(s).
a. In the Authentication Protocol field, use the drop-down list to select the
authentication method to be used.
b. To use a RADIUS server to authenticate L2TP clients, check the Use
RADIUS to Authenticate L2TP Clients check box and type the IP address
of the L2TP server.
c. To permanently save these configuration changes on the module(s),
check the Save Configuration check box.
d. To synchronize with the High Availability configuration, check the
Synchronize with HA Configuration check box.
4. Click OK.
A progress window will be displayed. When the RADIUS configuration
completes, you will see Completed successfully for the selected modules.
To end the process before it completes, click Halt. The process will be
ended as soon as the module currently being configured is complete.
5. Click Close.