HP TMS zl Module Security Administrator's Guide

4-349
Configuring a VPN on the HP TMS zl Module
GRE Tunnels
The TMS zl Module will respond to IKE messages from the gateway at the
remote site. It will also initiate IKE when it receives traffic that is selected
in the IPsec policy associated with this IKE policy but the IPsec SA is not
active.
Figure 4-259. Manage IPsec Wizard
If you are configuring multiple modules, the next settings are module-specific.
Therefore, you must click one of the TMS zl Modules in the Devices list and
configure the settings for that specific module. Then you must select a
different device, and configure its settings, and so forth.
Whether you are configuring one module or multiple modules, refer to
Figure 4-260 for help configuring the next settings.