HP TMS zl Module Security Administrator's Guide

4-412
Configuring a VPN on the HP TMS zl Module
Manage Certificates
Figure 4-312. Manage Certificates Wizard > Configuration Preview
8. Review the configuration settings you have selected. If you want to save
the changes as well as apply them, select the Save Configuration check box.
If the TMS zl Module is a master in a cluster and you want to immediately
synchronize the changes, select the Synchronize changes to Participant
check box.Note that this will cause the participant to reboot.
If you need to change any settings, click Back until you reach the appro-
priate window and can select a different setting.
When you are ready to apply the configuration, click Next in the Configu-
ration Preview window.
9. The certificate is downloaded and installed on the TMS zl Module. After
the process completes successfully, close the window.
Note If you receive an error message, the TMS zl Module might not be able to
validate the CA certificate. A common problem is that the module has the
incorrect time. The module takes its clock from the host switch. Verify that
this switch has the correct time.
Install the IPsec Certificate
1. You should be at the TMS - VPN > Certificates tab.
2. You can install the TMS zl Module’s IPsec certificate in several ways: