HP TMS zl Module Security Administrator's Guide

4-422
Configuring a VPN on the HP TMS zl Module
Manage Certificates
Figure 4-322. Manage Certificates Wizard > Configuration Preview
12. Review the configuration settings you have selected. If you want to save
the changes as well as apply them, select the Save Configuration check box.
If the TMS zl Module is a master in a cluster and you want to immediately
synchronize the changes, select the Synchronize changes to Participant
check box.Note that this will cause the participant to reboot.
If you need to change any settings, click Back until you reach the appro-
priate window and can select a different setting.
When you are ready to apply the configuration, click Next in the Configu-
ration Preview window.
13. After the process completes successfully, close the window.
Retrieve the CA Certificate
Next, you must retrieve the CA certificate.
1. In the navigation tree, you should be at the TMS zl folder or a device listed
in that folder. You should be at the TMS-VPN > Certificates tab.
2. You can retrieve the certificate in several ways:
• If you want to retrieve the certificate for a single module, you can
click the CA Certificates tab. Right-click the TMS zl Module’s name and
select Retrieve. Move to step 7 on page 4-405.