HP TMS zl Module Security Administrator's Guide

4-426
Configuring a VPN on the HP TMS zl Module
Manage Certificates
iii. If you launched the wizard from the TMS zl folder, the Select
Devices window is displayed. Select the modules that you want
to configure (you can press and hold [Ctrl] to select multiple
modules) and click the arrow button to move them to the Selected
Devices list. Click Next.
3. The window looks slightly different depending on whether you have
selected multiple modules. If you have, you must select each module in
the Devices list and configure the settings for it.
Figure 4-327. Manage Certificates Wizard > Retrieve CRL through SCEP Window
4. For Trusted Certificate, select the CA certificate that you imported
with SCEP.
5. Click Next.
6. Review the settings. If they are correct, click Next. (Remember to select
the Save Configuration check box to save the settings to the module’s
startup-config.)
If you need to change any settings, click Cancel and modify the SCEP
settings.
7. After the process completes successfully, close the window.