HP TMS zl Module Security Administrator's Guide

1-54
Managing TMS zl Modules
Configuring High Availability Clusters
and whose VLAN information has been has been discovered and/or
synchronized, will be displayed in the list. The modules can be either
in the same switch or different switches in the same network.
c. Select different device IDs for the Master and Participant.
d. Enter a device priority (1-255). Remember though, that once the
cluster is formed, if the modules are rebooted for any reason, the
order in which they are booted determines which module becomes
the Master. The first module to boot becomes the Master and the other
becomes the Participant.
e. From the drop-down list, select the VLAN ID for the HA VLAN that is
configured on the switch or switches in which the modules are
installed.
f. Enter an HA VLAN IP address and subnet mask for each module.