HP TMS zl Module Security Administrator's Guide

1-73
Managing TMS zl Modules
Configuring High Availability Clusters
Synchronize HA Configuration
1. To navigate to the Synchronize HA Configuration window:
a. In the navigation tree, right-click the Master TMS zl Module in the HA
cluster that you want to synchronize.
b. Select TMS-High Availability from the menu.
c. Select Synchronize Configuration from the sub menu. This option is
disabled if the selected module does not belong to an HA cluster. The
following dialog is displayed:
Figure 1-38. Synchronize HA Configuration
2. Select one of the two synchronization options that are available:
• Synchronize (copy) the last saved configuration on the Master to the
Participant -- this option will result in copying the last saved configu-
ration for the Master to the Participant. If the previous configuration
on the Participant was different, then the Participant will reboot.
• Save the configuration on the Master and then synchronize (copy) this
saved configuration to the Participant -- this option saves the running
configuration on the Master to its startup configuration, and then
synchronizes the configuration to the Participant. This option always
results in a reboot of the Participant.
3. Click OK to apply the selected synchronization option.
4. During synchronization, a Status window displays the synchronization
progress. Click Close when the synchronization completes.