HP VPN Firewall Appliances Access Control Command Reference

116
SubState:NONE
ACL:3000
Work-mode:Primary
VPN instance:NONE
MAC IP Vlan Interface
---------------------------------------------------------------------
000d-88f8-0eac 3.3.3.3 0 GigabitEthernet0/2
Total 2 user(s) matched, 2 listed.
Table 35 Command output
Field Descri
p
tion
Index Index of the portal user.
State Current status of the portal user.
SubState Current sub-status of the portal user.
ACL Authorization ACL of the portal user.
Work-mode
User's working mode:
• Primary.
• Secondary.
• Stand-alone.
VPN instance VPN to which the portal user belongs.
MAC MAC address of the portal user.
IP IP address of the portal user.
Vlan VLAN to which the portal user belongs.
Interface Interface to which the portal user is attached.
Total 2 user(s) matched, 2 listed Total number of portal users.
portal auth-network
Use portal auth-network to configure a portal authentication source subnet on an interface.
Use undo portal auth-network to remove a specific portal authentication source subnet or all portal
authentication subnets.
Syntax
portal auth-network ipv4-network-address { mask-length | mask }
undo portal auth-network { ipv4-network-address | all }
Default
The portal authentication source IPv4 subnet is 0.0.0.0/0, and users in all subnets must pass portal
authentication.
Views
Interface view
Default command level
2: System level