HP VPN Firewall Appliances Access Control Command Reference
Table Of Contents
- Title Page
- Contents
- ACL commands
- acl
- acl accelerate
- acl copy
- acl ipv6
- acl ipv6 copy
- acl ipv6 name
- acl name
- description
- display acl
- display acl accelerate
- display acl ipv6
- reset acl counter
- reset acl ipv6 counter
- rule (Ethernet frame header ACL view)
- rule (IPv4 advanced ACL view)
- rule (IPv4 basic ACL view)
- rule (IPv6 advanced ACL view)
- rule (IPv6 basic ACL view)
- rule comment
- rule remark
- step
- Security zone commands
- Address resource commands
- Service resource commands
- Time range resource commands
- Interzone policy commands
- Session management commands
- application aging-time
- display application aging-time
- display session aging-time
- display session relation-table
- display session statistics
- display session statistics history
- display session table
- reset session
- reset session statistics
- session aging-time
- session checksum
- session log bytes-active
- session log enable
- session log packets-active
- session log time-active
- session mode hybrid
- session persist acl
- session synchronization enable
- IP virtual fragment reassembly commands
- Connection limit commands
- Portal commands
- access-user detect
- display portal acl
- display portal connection statistics
- display portal free-rule
- display portal interface
- display portal local-server
- display portal server
- display portal server statistics
- display portal tcp-cheat statistics
- display portal user
- portal auth-network
- portal delete-user
- portal domain
- portal free-rule
- portal local-server
- portal max-user
- portal nas-id-profile
- portal nas-ip
- portal nas-port-id
- portal nas-port-type
- portal redirect-url
- portal server
- portal server banner
- portal server method
- portal server server-detect
- portal server user-sync
- reset portal connection statistics
- reset portal server statistics
- reset portal tcp-cheat statistics
- AAA commands
- General AAA commands
- aaa nas-id profile
- access-limit enable
- accounting command
- accounting default
- accounting dvpn
- accounting login
- accounting optional
- accounting portal
- accounting ppp
- accounting ssl-vpn
- authentication default
- authentication dvpn
- authentication login
- authentication portal
- authentication ppp
- authentication ssl-vpn
- authentication super
- authorization command
- authorization default
- authorization dvpn
- authorization login
- authorization portal
- authorization ppp
- authorization ssl-vpn
- cut connection
- display connection
- display domain
- domain
- domain default enable
- domain if-unknown
- idle-cut enable
- ip pool
- nas-id bind vlan
- self-service-url enable
- session-time include-idle-time
- state (ISP domain view)
- Local user commands
- RADIUS commands
- accounting-on enable
- attribute 25 car
- data-flow-format (RADIUS scheme view)
- display radius scheme
- display radius statistics
- display stop-accounting-buffer (for RADIUS)
- key (RADIUS scheme view)
- nas-ip (RADIUS scheme view)
- primary accounting (RADIUS scheme view)
- primary authentication (RADIUS scheme view)
- radius client
- radius nas-ip
- radius scheme
- radius trap
- reset radius statistics
- reset stop-accounting-buffer (for RADIUS)
- retry
- retry realtime-accounting
- retry stop-accounting (RADIUS scheme view)
- secondary accounting (RADIUS scheme view)
- secondary authentication (RADIUS scheme view)
- security-policy-server
- server-type (RADIUS scheme view)
- state primary
- state secondary
- stop-accounting-buffer enable (RADIUS scheme view)
- timer quiet (RADIUS scheme view)
- timer realtime-accounting (RADIUS scheme view)
- timer response-timeout (RADIUS scheme view)
- user-name-format (RADIUS scheme view)
- vpn-instance (RADIUS scheme view)
- HWTACACS commands
- data-flow-format (HWTACACS scheme view)
- display hwtacacs
- display stop-accounting-buffer (for HWTACACS)
- hwtacacs nas-ip
- hwtacacs scheme
- key (HWTACACS scheme view)
- nas-ip (HWTACACS scheme view)
- primary accounting (HWTACACS scheme view)
- primary authentication (HWTACACS scheme view)
- primary authorization
- reset hwtacacs statistics
- reset stop-accounting-buffer (for HWTACACS)
- retry stop-accounting (HWTACACS scheme view)
- secondary accounting (HWTACACS scheme view)
- secondary authentication (HWTACACS scheme view)
- secondary authorization
- stop-accounting-buffer enable (HWTACACS scheme view)
- timer quiet (HWTACACS scheme view)
- timer realtime-accounting (HWTACACS scheme view)
- timer response-timeout (HWTACACS scheme view)
- user-name-format (HWTACACS scheme view)
- vpn-instance (HWTACACS scheme view)
- General AAA commands
- Password control commands
- display password-control
- display password-control blacklist
- password
- password-control { aging | composition | history | length } enable
- password-control aging
- password-control alert-before-expire
- password-control authentication-timeout
- password-control complexity
- password-control composition
- password-control enable
- password-control expired-user-login
- password-control history
- password-control length
- password-control login idle-time
- password-control login-attempt
- password-control password update interval
- password-control super aging
- password-control super composition
- password-control super length
- reset password-control blacklist
- reset password-control history-record
- FIPS configuration commands
- Support and other resources
- Index
130
retry retries: Maximum number of probe attempts. The retries argument ranges from 1 to 5 and defaults
to 3. If the number of consecutive, failed probes reaches this value, the access device considers that the
portal server is unreachable.
Usage guidelines
You can specify one or more detection methods and the actions to be taken.
If both detection methods are specified, a portal server is regarded as unreachable as long as one
detection method fails, and an unreachable portal server is regarded as recovered only when both
detection methods succeed.
If multiple actions are specified, the system executes all the specified actions when the status of a portal
server changes.
Deleting a portal server on the device will delete the detection function for the portal server.
If you configure the detection function for a portal server for multiple times, the last configuration takes
effect. If you do not specify an optional parameter, the default setting of the parameter is used.
The portal server detection function takes effect only when the portal server is referenced on an interface.
Authentication-related packets from a portal server, such as logon requests and logoff requests, have the
same effect as the portal heartbeat packets for the portal server detection function.
Related command: display portal server.
Examples
# Configure the device to detect portal server pts:
• Specifying both the HTTP probe and portal heartbeat probe methods
• Setting the probe interval to 600 seconds
• Specifying the device to send a server unreachable trap message, send a log message and disable
portal authentication to permit unauthenticated portal users, if two consecutive probes fail.
<Sysname> system-view
[Sysname] portal server pts server-detect method http portal-heartbeat action log
permit-all trap interval 600 retry 2
portal server user-sync
Use portal server user-sync to configure portal user information synchronization with a specific portal
server. When this function is configured, the device periodically checks and responds to the user
synchronization packet received from the specified portal server, so as to keep the consistency of the
online user information on the device and the portal server.
Use undo portal server user-sync to cancel the portal user information synchronization configuration with
the specified portal server.
Syntax
portal server server-name user-sync [ interval interval ] [ retry retries ]
undo portal server server-name user-sync
Default
The portal user synchronization function is not configured.
Views
System view