HP VPN Firewall Appliances Access Control Command Reference
Table Of Contents
- Title Page
- Contents
- ACL commands
- acl
- acl accelerate
- acl copy
- acl ipv6
- acl ipv6 copy
- acl ipv6 name
- acl name
- description
- display acl
- display acl accelerate
- display acl ipv6
- reset acl counter
- reset acl ipv6 counter
- rule (Ethernet frame header ACL view)
- rule (IPv4 advanced ACL view)
- rule (IPv4 basic ACL view)
- rule (IPv6 advanced ACL view)
- rule (IPv6 basic ACL view)
- rule comment
- rule remark
- step
- Security zone commands
- Address resource commands
- Service resource commands
- Time range resource commands
- Interzone policy commands
- Session management commands
- application aging-time
- display application aging-time
- display session aging-time
- display session relation-table
- display session statistics
- display session statistics history
- display session table
- reset session
- reset session statistics
- session aging-time
- session checksum
- session log bytes-active
- session log enable
- session log packets-active
- session log time-active
- session mode hybrid
- session persist acl
- session synchronization enable
- IP virtual fragment reassembly commands
- Connection limit commands
- Portal commands
- access-user detect
- display portal acl
- display portal connection statistics
- display portal free-rule
- display portal interface
- display portal local-server
- display portal server
- display portal server statistics
- display portal tcp-cheat statistics
- display portal user
- portal auth-network
- portal delete-user
- portal domain
- portal free-rule
- portal local-server
- portal max-user
- portal nas-id-profile
- portal nas-ip
- portal nas-port-id
- portal nas-port-type
- portal redirect-url
- portal server
- portal server banner
- portal server method
- portal server server-detect
- portal server user-sync
- reset portal connection statistics
- reset portal server statistics
- reset portal tcp-cheat statistics
- AAA commands
- General AAA commands
- aaa nas-id profile
- access-limit enable
- accounting command
- accounting default
- accounting dvpn
- accounting login
- accounting optional
- accounting portal
- accounting ppp
- accounting ssl-vpn
- authentication default
- authentication dvpn
- authentication login
- authentication portal
- authentication ppp
- authentication ssl-vpn
- authentication super
- authorization command
- authorization default
- authorization dvpn
- authorization login
- authorization portal
- authorization ppp
- authorization ssl-vpn
- cut connection
- display connection
- display domain
- domain
- domain default enable
- domain if-unknown
- idle-cut enable
- ip pool
- nas-id bind vlan
- self-service-url enable
- session-time include-idle-time
- state (ISP domain view)
- Local user commands
- RADIUS commands
- accounting-on enable
- attribute 25 car
- data-flow-format (RADIUS scheme view)
- display radius scheme
- display radius statistics
- display stop-accounting-buffer (for RADIUS)
- key (RADIUS scheme view)
- nas-ip (RADIUS scheme view)
- primary accounting (RADIUS scheme view)
- primary authentication (RADIUS scheme view)
- radius client
- radius nas-ip
- radius scheme
- radius trap
- reset radius statistics
- reset stop-accounting-buffer (for RADIUS)
- retry
- retry realtime-accounting
- retry stop-accounting (RADIUS scheme view)
- secondary accounting (RADIUS scheme view)
- secondary authentication (RADIUS scheme view)
- security-policy-server
- server-type (RADIUS scheme view)
- state primary
- state secondary
- stop-accounting-buffer enable (RADIUS scheme view)
- timer quiet (RADIUS scheme view)
- timer realtime-accounting (RADIUS scheme view)
- timer response-timeout (RADIUS scheme view)
- user-name-format (RADIUS scheme view)
- vpn-instance (RADIUS scheme view)
- HWTACACS commands
- data-flow-format (HWTACACS scheme view)
- display hwtacacs
- display stop-accounting-buffer (for HWTACACS)
- hwtacacs nas-ip
- hwtacacs scheme
- key (HWTACACS scheme view)
- nas-ip (HWTACACS scheme view)
- primary accounting (HWTACACS scheme view)
- primary authentication (HWTACACS scheme view)
- primary authorization
- reset hwtacacs statistics
- reset stop-accounting-buffer (for HWTACACS)
- retry stop-accounting (HWTACACS scheme view)
- secondary accounting (HWTACACS scheme view)
- secondary authentication (HWTACACS scheme view)
- secondary authorization
- stop-accounting-buffer enable (HWTACACS scheme view)
- timer quiet (HWTACACS scheme view)
- timer realtime-accounting (HWTACACS scheme view)
- timer response-timeout (HWTACACS scheme view)
- user-name-format (HWTACACS scheme view)
- vpn-instance (HWTACACS scheme view)
- General AAA commands
- Password control commands
- display password-control
- display password-control blacklist
- password
- password-control { aging | composition | history | length } enable
- password-control aging
- password-control alert-before-expire
- password-control authentication-timeout
- password-control complexity
- password-control composition
- password-control enable
- password-control expired-user-login
- password-control history
- password-control length
- password-control login idle-time
- password-control login-attempt
- password-control password update interval
- password-control super aging
- password-control super composition
- password-control super length
- reset password-control blacklist
- reset password-control history-record
- FIPS configuration commands
- Support and other resources
- Index
165
Parameters
pool-number: Specifies the address pool number in the range of 0 to 99.
low-ip-address and high-ip-address: Specifies the start and end IP addresses of the address pool. Up to
1024 addresses are allowed for an address pool. If you do not specify the end IP address, there is only
one IP address in the pool, which is the start IP address.
Usage guidelines
You can also configure an address pool for PPP users in system view. An IP address pool configured in
system view is used to assign IP addresses to PPP users who do not need to be authenticated. To specify
the address pool used for assigning an IP address to the peer device, use the remote address command
in interface view.
An IP address pool configured in ISP domain view is used to assign IP addresses to the ISP domain's PPP
users who must be authenticated. Configure IP address pools for ISP domains in scenarios where an
interface serves a great amount of PPP users but the address resources are inadequate. For example, a
GigabitEthernet interface running PPPoE can accommodate up to 4096 users. However, only one
address pool with up to 1024 addresses can be configured on its VT. This is far from what is required. To
address the issue, configure address pools for ISP domains and assign addresses from them to the PPP
users by domain.
Examples
# Configure the IP address pool 0 with the address range of 129.102.0.1 to 129.102.0.10.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] ip pool 0 129.102.0.1 129.102.0.10
Related commands
• ip pool (Network Management Command Reference)
• remote address (Network Management Command Reference)
nas-id bind vlan
Use nas-id bind vlan to bind a NAS ID with a VLAN.
Use undo nas-id bind vlan to remove a NAS ID-VLAN binding.
Syntax
nas-id nas-identifier bind vlan vlan-id
undo nas-id nas-identifier bind vlan vlan-id
Default
No NAS ID-VLAN binding exists.
Views
NAS ID profile view
Default command level
2: System level
Parameters
nas-identifier: Specifies the NAS ID, a case-sensitive string of 1 to 20 characters