HP VPN Firewall Appliances Access Control Command Reference

168
Default command level
2: System level
Parameters
active: Places the ISP domain in active state to allow the users in the ISP domain to request network
services.
block: Places the ISP domain in blocked state to prevent users in the ISP domain from requesting network
services.
Usage guidelines
By blocking an ISP domain, you disable offline users of the domain from requesting network services. The
online users are not affected.
Examples
# Place the ISP domain test to the blocked state.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] state block
Local user commands
access-limit
Use access-limit to limit the number of concurrent users using the same local user account.
Use undo access-limit to remove the limitation.
Syntax
access-limit max-user-number
undo access-limit
Default
There is no limit to the number of users who concurrently use the same local user account.
Views
Local user view
Default command level
3: Manage level
Parameters
max-user-number: Specifies the maximum number of concurrent users using the same local user account.
The value range is 1 to 1024.
Usage guidelines
This limit has no effect on FTP users because accounting is not available for FTP users.
Examples
# Limit the maximum number of concurrent users using local user account abc to 5.
<Sysname> system-view