HP VPN Firewall Appliances Access Control Command Reference

171
Views
Local user view
Default command level
3: Manage level
Parameters
call-number call-number: Specifies a calling number for ISDN user authentication. The call-number
argument is a string of 1 to 64 characters. This option applies only to PPP users.
subcall-number: Specifies the sub-calling number. The total length of the calling number and the
sub-calling number cannot be more than 62 characters.
ip ip-address: Specifies the IP address of the user.
Usage guidelines
Binding attributes are checked upon authentication of a local user. If the binding attributes of a local user
do not match the configured ones, the user fails checking and authentication.
Binding attribute checking does not take the service types of users into account. A configured binding
attribute is effective for all types of users. Configure binding attributes for different types of local users
with caution.
Examples
# Configure the bound IP of local user abc as 3.3.3.3.
<Sysname> system-view
[Sysname] local-user abc
[Sysname-luser-abc] bind-attribute ip 3.3.3.3
display local-user
Use display local-user to display configuration and statistics information about local users.
Syntax
display local-user [ vd vd-name ] [ idle-cut { disable | enable } | service-type { dvpn | ftp | portal | ppp
| ssh | telnet | terminal | web } | state { active | block } | user-name user-name | vlan vlan-id ] [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vd vd-name: Specifies the local users who belong to the specified VD. The vd-name argument represents
the VD name, a case-insensitive string of 1 to 20 characters.
idle-cut { disable | enable }: Specifies local users with the idle cut function disabled or enabled.
service-type: Specifies the local users who use a specified type of service.
• dvpn: DVPN tunnel users.
The following matrix shows the dvpn keyword and firewalls and firewall modules compatibility: