HP VPN Firewall Appliances Access Control Command Reference

190
Field Descri
p
tion
PKT response Counts of responses from servers.
Session ctrl pkt Counts of session control messages.
Normal author request Counts of normal authorization requests.
Set policy result Counts of responses to the Set policy packets.
Accounting on request Counts of accounting-on requests.
Accounting on response Counts of accounting-on responses.
Dynamic Author Ext request Counts of dynamic authorization extension requests.
RADIUS sent messages statistic Statistics for sent RADIUS messages.
Auth accept Number of accepted authentication packets.
Auth reject Number of rejected authentication packets.
EAP auth replying Number of replying packets of EAP authentication.
Account success Number of accounting succeeded packets.
Account failure Number of accounting failed packets.
Server ctrl req Number of server control requests.
RecError_MSG_sum Number of received packets in error.
SndMSG_Fail_sum Number of packets that failed to be sent out.
Timer_Err Number of packets for indicating timer startup failures.
Alloc_Mem_Err Number of packets for indicating memory allocation failures.
State Mismatch Number of packets for indicating mismatching status.
Other_Error Number of packets for indicating other types of errors.
No-response-acct-stop packet Number of times that no response was received for stop-accounting packets.
Discarded
No-response-acct-stop packet
for buffer overflow
Number of stop-accounting packets that were buffered but then discarded
due to full memory.
The following matrix shows the maximum value of the state statistic and DEAD fields in the command
output on different firewalls and firewall modules:
Hardware Maximum value
F1000-A-EI/F1000-S-EI 1024
F1000-E 8192
F5000 8192
F5000-S/F5000-C 8192
VPN firewall modules 8192
20-Gbps VPN firewall modules 8192
Related commands
radius scheme