HP VPN Firewall Appliances Access Control Command Reference

193
# For RADIUS scheme radius1, set the shared key for secure accounting communication to ok in plain
text.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] key accounting ok
# For RADIUS scheme radius1, set the shared key for secure authentication/authorization
communication to $c$3$NMCbVjyIutaV6csCOGp4zsKRTlg2eT3B in cipher text.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] key authentication cipher
$c$3$NMCbVjyIutaV6csCOGp4zsKRTlg2eT3B
Related commands
display radius scheme
nas-ip (RADIUS scheme view)
Use nas-ip to specify a source IP address for outgoing RADIUS packets.
Use undo nas-ip to restore the default.
Syntax
nas-ip { ipv4-address | ipv6 ipv6-address }
undo nas-ip
Default
The source IP address of an outgoing RADIUS packet is that configured by the radius nas-ip command
in system view. If the radius nas-ip command is not configured, the source IP address is the IP address of
the outbound interface.
Views
RADIUS scheme view
Default command level
2: System level
Parameters
ipv4-address: Specifies an IPv4 address in dotted decimal notation. It must be an address of the device
and cannot be 0.0.0.0, 255.255.255.255, a class D address, or a class E address.
ipv6 ipv6-address: Specifies an IPv6 address. It must be a unicast address of the device and cannot be
a link-local address.
Usage guidelines
The source IP address of RADIUS packets that a NAS sends must match the IP address of the NAS that
is configured on the RADIUS server. A RADIUS server identifies a NAS by its IP address. Upon receiving
a RADIUS packet, a RADIUS server checks whether the source IP address of the packet is the IP address
of any managed NAS. If it is, the server processes the packet. If it is not, the server drops the packet.
The source IP address specified for outgoing RADIUS packets must be of the same IP version as the IP
addresses of the RADIUS servers in the RADIUS scheme. Otherwise, the source IP address configuration
does not take effect.