HP VPN Firewall Appliances Access Control Command Reference

195
vpn-instance vpn-instance-name: Specifies the VPN to which the primary RADIUS accounting server
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the server is
on the public network, do not specify this option.
Usage guidelines
Make sure the port number and shared key settings of the primary RADIUS accounting server are the
same as those configured on the server.
The IP addresses of the accounting servers and those of the authentication/authorization servers must be
of the same IP version.
The IP addresses of the primary and secondary accounting servers must be different from each other.
Otherwise, the configuration fails.
The shared key configured by this command takes precedence over that configured by using the key
accounting [ cipher | simple ] key command.
If the specified server resides on a VPN, specify the VPN by using the vpn-instance vpn-instance-name
option. The VPN specified by this command takes precedence over the VPN specified for the RADIUS
scheme.
If you change the primary accounting server when the device has already sent a start-accounting request
to the server, the communication with the primary server times out, and the device looks for a server in
active state from the new primary server on.
If you remove an accounting server being used by users, the device can no longer send real-time
accounting requests or stop-accounting requests for the users, and it does not buffer the stop-accounting
requests.
For security purposes, all shared keys, including keys configured in plain text, are saved in cipher text.
Examples
# For RADIUS scheme radius1, set the IP address of the primary accounting server to 10.110.1.2, the UDP
port to 1813, and the shared key to hello in plain text.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] primary accounting 10.110.1.2 1813 key simple hello
Related commands
• key
• vpn-instance (RADIUS scheme view)
primary authentication (RADIUS scheme view)
Use primary authentication to specify the primary RADIUS authentication/authorization server.
Use undo primary authentication to remove the configuration.
Syntax
primary authentication { ipv4-address | ipv6 ipv6-address } [ port-number | key [ cipher | simple ] key
| probe username name [ interval interval ] | vpn-instance vpn-instance-name ] *
undo primary authentication
Default
No primary RADIUS authentication/authorization server is specified.