HP VPN Firewall Appliances Access Control Command Reference

13
rule (Ethernet frame header ACL view)
Use rule to create or edit an Ethernet frame header ACL rule. You can edit ACL rules only when the match
order is config.
Use undo rule to delete an Ethernet frame header ACL rule or some attributes in the rule. If no optional
keywords are provided, this command deletes the entire rule. If optional keywords or arguments are
provided, this command deletes the specified attributes.
Syntax
rule [ rule-id ] { deny | permit } [ cos vlan-pri | counting | dest-mac dest-address dest-mask | { lsap
lsap-type lsap-type-mask | type protocol-type protocol-type-mask } | source-mac source-address
source-mask | time-range time-range-name ] *
undo rule rule-id [ counting | time-range ] *
Default
An Ethernet frame header ACL does not contain any rule.
Views
Ethernet frame header ACL view
Default command level
2: System level
Parameters
rule-id: Specifies a rule ID, in the range of 0 to 65534. If no rule ID is provided when you create an ACL
rule, the system automatically assigns it a rule ID. This rule ID is the nearest higher multiple of the
numbering step to the current highest rule ID, starting from 0. For example, if the rule numbering step is
5 and the current highest rule ID is 28, the rule is numbered 30.
deny: Denies matching packets.
permit: Allows matching packets to pass.
cos vlan-pri: Matches an 802.1p priority. The vlan-pri argument can be a number in the range of 0 to 7,
or in words, best-effort (0), background (1) , spare (2), excellent-effort (3), controlled-load (4), video (5),
voice (6), or network-management (7).
counting: Counts the number of times the ACL rule has been matched. In the software version, the device
counts the number of times the ACL rule has been matched no matter whether this keyword is specified.
dest-mac dest-address dest-mask: Matches a destination MAC address range. The dest-address and
dest-mask arguments represent a destination MAC address and mask in H-H-H format.
lsap lsap-type lsap-type-mask: Matches the DSAP and SSAP fields in LLC encapsulation. The lsap-type
argument is a 16-bit hexadecimal number that represents the encapsulation format. The lsap-type-mask
argument is a 16-bit hexadecimal number that represents the LSAP mask.
type protocol-type protocol-type-mask: Matches one or more protocols in the Ethernet frame header. The
protocol-type argument is a 16-bit hexadecimal number that represents a protocol type in Ethernet_II and
Ethernet_SNAP frames. The protocol-type-mask argument is a 16-bit hexadecimal number that represents
a protocol type mask.
source-mac source-address source-mask: Matches a source MAC address range. The source-address
argument represents a source MAC address, and the source-mask argument represents a mask in H-H-H
format.