HP VPN Firewall Appliances Access Control Command Reference

206
If the specified server resides on a VPN, specify the VPN by using the vpn-instance vpn-instance-name
option. The VPN specified by this command takes precedence over the VPN specified for the RADIUS
scheme.
If you remove a secondary accounting server when the device has already sent a start-accounting
request to the server, the communication with the secondary server times out, and the device looks for a
server in active state from the primary server on.
If you remove an accounting server being used by online users, the device can no longer send real-time
accounting requests or stop-accounting requests for the users, and it does not buffer the stop-accounting
requests.
For security purposes, all shared keys, including keys configured in plain text, are saved in cipher text.
Examples
# For RADIUS scheme radius1, specify two secondary accounting servers with the server IP addresses of
10.110 .1.1 a n d 10 .110.1.2 and the UDP port number of 1813. Set the shared keys to hello in plain text.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] secondary accounting 10.110.1.1 1813 key hello
[Sysname-radius-radius1] secondary accounting 10.110.1.2 1813 key hello
# For RADIUS scheme radius2, set the IP address of the secondary accounting server to 10.110 .1.1, t h e
UDP port to 1813, and the shared key to $c$3$NMCbVjyIutaV6csCOGp4zsKRTlg2eT3B in cipher text.
<Sysname> system-view
[Sysname] radius scheme radius2
[Sysname-radius-radius2] secondary accounting 10.110.1.1 1813 key cipher
$c$3$NMCbVjyIutaV6csCOGp4zsKRTlg2eT3B
Related commands
• key
• state
• vpn-instance (RADIUS scheme view)
secondary authentication (RADIUS scheme view)
Use secondary authentication to specify a secondary RADIUS authentication/authorization server.
Use undo secondary authentication to remove the configuration.
Syntax
secondary authentication { ipv4-address | ipv6 ipv6-address } [ port-number | key [ cipher | simple ]
key | probe username name [ interval interval ] | vpn-instance vpn-instance-name ] *
undo secondary authentication [ ipv4-address | ipv6 ipv6-address ]
Default
No secondary RADIUS authentication/authorization server is specified.
Views
RADIUS scheme view
Default command level
2: System level