HP VPN Firewall Appliances Access Control Command Reference

209
Default
No security policy server is specified for a RADIUS scheme.
Views
RADIUS scheme view
Default command level
2: System level
Parameters
ip-address: Specifies a security policy server by its IP address.
all: Specifies all security policy servers.
Usage guidelines
You can specify up to eight security policy servers for a RADIUS scheme.
You can change security policy servers for a RADIUS scheme only when no user is using the scheme.
Examples
# Specify security policy server 10.110.1.2 for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] security-policy-server 10.110.1.2
server-type (RADIUS scheme view)
Use server-type to specify the RADIUS server type.
Use undo server-type to restore the default.
Syntax
server-type { extended | standard }
undo server-type
Default
The supported RADIUS server type is standard.
Views
RADIUS scheme view
Default command level
2: System level
Parameters
extended: Specifies the extended RADIUS server (generally running on IMC), which requires the RADIUS
client and RADIUS server to interact according to the procedures and packet formats provisioned by the
proprietary RADIUS protocol.
standard: Specifies the standard RADIUS server, which requires the RADIUS client and RADIUS server to
interact according to the procedures and packet format of the standard RADIUS protocol (RFC 2865 and
2866 or their successors).