HP VPN Firewall Appliances Access Control Command Reference

221
display stop-accounting-buffer (for HWTACACS)
Use display stop-accounting-buffer to display information about buffered stop-accounting requests.
Syntax
display stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies buffered stop-accounting requests that are destined
for the accounting server defined in an HWTACACS scheme. The HWTACACS scheme name is a
case-insensitive string of 1 to 32 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about stop-accounting requests buffered for HWTACACS scheme hwt1.
<Sysname> display stop-accounting-buffer hwtacacs-scheme hwt1
Total 0 record(s) Matched
Related commands
• reset stop-accounting-buffer
• stop-accounting-buffer enable
• retry stop-accounting
hwtacacs nas-ip
Use hwtacacs nas-ip to specify a source IP address for outgoing HWTACACS packets.
Use undo hwtacacs nas-ip to remove the configuration.
Syntax
hwtacacs nas-ip ip-address [ vpn-instance vpn-instance-name ]
undo hwtacacs nas-ip ip-address [ vpn-instance vpn-instance-name ]
Default
The source IP address of a packet sent to the server is the IP address of the outbound interface.