HP VPN Firewall Appliances Access Control Command Reference

223
Views
System view
Default command level
3: Manage level
Parameters
hwtacacs-scheme-name: HWTACACS scheme name, a case-insensitive string of 1 to 32 characters.
Usage guidelines
An HWTACACS scheme can be referenced by more than one ISP domain at the same time.
An HWTACACS scheme referenced by ISP domains cannot be removed.
Examples
# Create an HWTACACS scheme named hwt1, and enter HWTACACS scheme view.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1]
key (HWTACACS scheme view)
Use key to set the shared key for secure HWTACACS authentication, authorization, or accounting
communication.
Use undo key to remove the configuration.
Syntax
key { accounting | authentication | authorization } [ cipher | simple ] key
undo key { accounting | authentication | authorization }
Default
No shared key is configured.
Views
HWTACACS scheme view
Default command level
2: System level
Parameters
accounting: Sets the shared key for secure HWTACACS accounting communication.
authentication: Sets the shared key for secure HWTACACS authentication communication.
authorization: Sets the shared key for secure HWTACACS authorization communication.
cipher: Sets a ciphertext shared key. This key will be displayed in cipher text.
simple: Sets a plaintext shared key. This key will be displayed in plain text.
key: Shared key, a case-sensitive string of 1 to 64 characters. In FIPS mode, you cannot set a plaintext key,
and the key must contain at least 8 characters comprising uppercase and lowercase letters, digits, and
special characters.