HP VPN Firewall Appliances Access Control Command Reference

226
vpn-instance vpn-instance-name: Specifies the VPN to which the primary HWTACACS accounting
server belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the
server is on the public network, do not specify this option.
Usage guidelines
The IP addresses of the primary and secondary accounting servers must be different. Otherwise, the
configuration fails.
If the specified server resides on a VPN, specify the VPN by using the vpn-instance vpn-instance-name
option.
If you execute the command multiple times, the most recent configuration takes effect.
You can remove an accounting server only when it is not used by any active TCP connection to send
accounting packets. Removing an accounting server only affects accounting processes that occur after
the remove operation.
The VPN specified by this command takes precedence over the VPN specified for the HWTACACS
scheme.
Examples
# Specify the IP address and port number of the primary accounting server for HWTACACS scheme
test1 a s 10 .16 3 .15 5 .12 a n d 49.
<Sysname> system-view
[Sysname] hwtacacs scheme test1
[Sysname-hwtacacs-test1] primary accounting 10.163.155.12 49
Related commands
• display hwtacacs
• vpn-instance (HWTACACS scheme view)
primary authentication (HWTACACS scheme view)
Use primary authentication to specify the primary HWTACACS authentication server.
Use undo primary authentication to remove the configuration.
Syntax
primary authentication ip-address [ port-number | vpn-instance vpn-instance-name ] *
undo primary authentication
Default
No primary HWTACACS authentication server is specified.
Views
HWTACACS scheme view
Default command level
2: System level
Parameters
ip-address: IP address of the primary HWTACACS authentication server in dotted decimal notation. The
default is 0.0.0.0.