HP VPN Firewall Appliances Access Control Command Reference

227
port-number: Specifies the service port number of the primary HWTACACS authentication server. The
value range for the port number is 1 to 65535, and the default setting is 49.
vpn-instance vpn-instance-name: Specifies the VPN to which the primary HWTACACS authentication
server belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the
server is on the public network, do not specify this option.
Usage guidelines
The IP addresses of the primary and secondary authentication servers must be different. Otherwise, the
configuration fails.
If the specified server resides on a VPN, specify the VPN by using the vpn-instance vpn-instance-name
option.
If you configure the command multiple times, the most recent configuration takes effect.
You can remove an authentication server only when it is not used by any active TCP connection to send
authentication packets. Removing an authentication server only affects authentication processes that
occur after the remove operation.
The VPN specified by this command takes precedence over the VPN specified for the HWTACACS
scheme.
Examples
# Specify the IP address and port number of the primary authentication server for HWTACACS scheme
hwt1 a s 10 .16 3 .15 5 .13 a n d 4 9.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] primary authentication 10.163.155.13 49
Related commands
• display hwtacacs
• vpn-instance (HWTACACS scheme view)
primary authorization
Use primary authorization to specify the primary HWTACACS authorization server.
Use undo primary authorization to remove the configuration.
Syntax
primary authorization ip-address [ port-number | vpn-instance vpn-instance-name ] *
undo primary authorization
Default
No primary HWTACACS authorization server is specified.
Views
HWTACACS scheme view
Default command level
2: System level