HP VPN Firewall Appliances Access Control Command Reference

228
Parameters
ip-address: IP address of the primary HWTACACS authorization server in dotted decimal notation. The
default is 0.0.0.0.
port-number: Specifies the service port number of the primary HWTACACS authorization server. The
value range for the port number is 1 to 65535, and the default setting is 49.
vpn-instance vpn-instance-name: Specifies the VPN to which the primary HWTACACS authorization
server belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the
server is on the public network, do not specify this option.
Usage guidelines
The IP addresses of the primary and secondary authorization servers must be different. Otherwise, the
configuration fails.
If the specified server resides on a VPN, specify the VPN by using the vpn-instance vpn-instance-name
option.
If you execute the command multiple times, the most recent configuration takes effect.
You can remove an authorization server only when it is not used by any active TCP connection to send
authorization packets. Removing an authorization server only affects authorization processes that occur
after the remove operation.
The VPN specified by this command takes precedence over the VPN specified for the HWTACACS
scheme.
Examples
# Configure the IP address and port number of the primary authorization server for HWTACACS scheme
hwt1 a s 10 .16 3 .15 5 .13 a n d 4 9.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] primary authorization 10.163.155.13 49
Related commands
• display hwtacacs
• vpn-instance (HWTACACS scheme view)
reset hwtacacs statistics
Use reset hwtacacs statistics to clear HWTACACS statistics.
Syntax
reset hwtacacs statistics { accounting | all | authentication | authorization }
Views
User view
Default command level
1: Monitor level
Parameters
accounting: Specifies the HWTACACS accounting statistics.
all: Specifies all HWTACACS statistics.