HP VPN Firewall Appliances Access Control Command Reference

230
Views
HWTACACS scheme view
Default command level
2: System level
Parameters
retry-times: Specifies the maximum number of stop-accounting request transmission attempts, in the
range of 1 to 300.
Examples
# Set the maximum number of stop-accounting request transmission attempts to 50 for HWTACACS
scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] retry stop-accounting 50
Related commands
• reset stop-accounting-buffer
• display stop-accounting-buffer
secondary accounting (HWTACACS scheme view)
Use secondary accounting to specify a secondary HWTACACS accounting server.
Use undo secondary accounting to remove the configuration.
Syntax
secondary accounting ip-address [ port-number | vpn-instance vpn-instance-name ] *
undo secondary accounting
Default
No secondary HWTACACS accounting server is specified.
Views
HWTACACS scheme view
Default command level
2: System level
Parameters
ip-address: IP address of the secondary HWTACACS accounting server in dotted decimal notation. The
default is 0.0.0.0.
port-number: Specifies the service port number of the secondary HWTACACS accounting server. The
value range for the port number is 1 to 65535, and the default setting is 49.
vpn-instance vpn-instance-name: Specifies the VPN to which the secondary HWTACACS accounting
server belongs to. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the
server is on the public network, do not specify this option.