HP VPN Firewall Appliances Access Control Command Reference

234
receives no response in the specified period of time, the NAS buffers and resends the packet until it
receives a response or until the number of transmission attempts reaches the configured limit. In the latter
case, the NAS discards the packet.
Examples
# In HWTACACS scheme hwt1, enable the device to buffer the stop-accounting requests that receive no
responses.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] stop-accounting-buffer enable
Related commands
• reset stop-accounting-buffer
• display stop-accounting-buffer
timer quiet (HWTACACS scheme view)
Use timer quiet to set the quiet timer for the primary server.
Use undo timer quiet to restore the default.
Syntax
timer quiet minutes
undo timer quiet
Default
The primary server quiet period is 5 minutes.
Views
HWTACACS scheme view
Default command level
2: System level
Parameters
minutes: Specifies the primary server quiet period in minutes, in the range of 1 to 255.
Usage guidelines
When the primary server is found unreachable, the device changes the status of the server from active to
blocked and keeps the server in blocked state until the quiet timer expires.
Examples
# Set the quiet timer for the primary server to 10 minutes.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer quiet 10
Related commands
display hwtacacs