HP VPN Firewall Appliances Access Control Command Reference

37
Default command level
1: Monitor level
Parameters
object-name: Displays a specific object. This argument is a case-insensitive string of 1 to 31 characters.
vd vd-name: Displays a specific object on a VD. The vd-name argument is a case-insensitive string of 1
to 20 characters. If you do not specify this option, an object by the name on the default VD is displayed.
Examples
# Display host address object hosttest on the default VD.
<Sysname> display object name hosttest
VD name: root
Name: hosttest Status: Out of Use
Host IP addresses: 1.1.1.1, 1.1.1.5
For command output descriptions, see commands display object mac, display object network, or display
object service.
display object network
Use display object network to display IP address objects.
Syntax
display object network [ host | range | subnet ] [ vd vd-name ]
Views
Any view
Default command level
1: Monitor level
Parameters
host: Displays host address objects.
range: Displays address range objects.
subnet: Displays subnet address objects.
vd vd-name: Displays the IP address objects of a VD. The vd-name argument is a case-insensitive string
of 1 to 20 characters. If you do not specify this option, IP address objects of the default VD are displayed.
Usage guidelines
IP address objects fall in to three sub-categories: host address object, address range object, and subnet
address object. If you do not specify any option, all types of IP address objects are displayed.
Examples
# Display all IP address objects of the default VD.
<Sysname> display object network
4 records in total for VD root.
Host name records
Name: hosttestname Status: Out of Use