HP VPN Firewall Appliances Access Control Command Reference

51
display object name
Use display object name to display a specific object.
Syntax
display object name object-name [ vd vd-name ]
Views
Any view
Default command level
1: Monitor level
Parameters
object-name: Displays a specific object. This argument is a case-insensitive string of 1 to 31 characters.
vd vd-name: Displays a specific object on a VD. The vd-name argument is a case-insensitive string of 1
to 20 characters. If you do not specify this option, this command displays an object by the name on the
default VD.
Examples
# Display host address object hosttest on the default VD.
<Sysname> display object name hosttest
VD name: root
Name: hosttest Status: Out of Use
Host IP addresses: 1.1.1.1, 1.1.1.5
For command output descriptions, see the command display object mac, display object network, or
display object service.
display object service
Use display object service to display user-defined service objects.
Syntax
display object service [ vd vd-name ]
Views
Any view
Default command level
1: Monitor level
Parameters
vd vd-name: Displays the user-defined service objects of a VD. The vd-name argument is a
case-insensitive string of 1 to 20 characters. If you do not specify this option, this command displays
user-defined service objects of the default VD.
Examples
# Display user-defined service objects on the default VD.
<Sysname> display object service
3 records in total for VD root.
Name: 2 Status: Out of Use