HP VPN Firewall Appliances Access Control Command Reference

60
time-range
Use time-range to configure a time range. If you provide an existing time range name, the command
adds a statement to the time range.
Use undo time-range to delete a time range or a statement in the time range.
Syntax
time-range time-range-name { start-time to end-time days [ from time1 date1 ] [ to time2 date2 ] | from
time1 date1 [ to time2 date2 ] | to time2 date2 }
undo time-range time-range-name [ start-time to end-time days [ from time1 date1 ] [ to time2 date2 ]
| from time1 date1 [ to time2 date2 ] | to time2 date2 ]
Default
No time range exists.
Views
System view
Default command level
2: System level
Parameters
time-range-name: Specifies a time range name. The name is a case-insensitive string of 1 to 32
characters. It must start with an English letter and to avoid confusion, it cannot be all.
start-time to end-time: Specifies a periodic statement. Both start-time and end-time are in hh:mm format
(24-hour clock). The value is in the range of 00:00 to 23:59 for the start time, and 00:00 to 24:00 for
the end time. The end time must be greater than the start time.
days: Specifies the day or days of the week (in words or digits) on which the periodic statement is valid.
If you specify multiple values, separate each value with a space, and make sure they do not overlap.
These values can take one of the following forms:
• A digit in the range of 0 to 6, respectively, for Sunday, Monday, Tuesday, Wednesday, Thursday,
Friday, and Saturday.
• A day of a week in abbreviated words: sun, mon, tue, wed, thu, fri, and sat.
• working-day for Monday through Friday.
• off-day for Saturday and Sunday.
• daily for the whole week.
from time1 date1: Specifies the start time and date of an absolute statement. The time1 argument
specifies the time of the day in hh:mm format (24-hour clock). Its value is in the range of 00:00 to 23:59.
The date1 argument specifies a date in MM/DD/YYYY or YYYY/MM/DD format, where MM is the
month of the year in the range of 1 to 12, DD is the day of the month with the range depending on MM,
and YYYY is the year in the calendar in the range of 1970 to 2100. If not specified, the start time is
01/01/1970 00:00 AM, the earliest time available in the system.
to time2 date2: Specifies the end time and date of the absolute time statement. The time2 argument has
the same format as the time1 argument, but its value is in the range of 00:00 to 24:00. The date2
argument has the same format and value range as the date1 argument. The end time must be greater
than the start time. If not specified, the end time is 12/31/2100 24:00 PM, the maximum time available
in the system.