HP VPN Firewall Appliances Access Control Command Reference

65
rule acl 3001
rule acl 3002
rule acl enable
Table 18 Command output
Field Descri
p
tion
1 times matched
The interzone policy rule has been matched once. When the interzone policy
rule has never been matched, the field is not displayed. When the time-range
is changed, the field is not cleared.
source-ip Name of the source IP object referenced by an interzone policy rule.
destination-ip Name of the destination IP object referenced by an interzone policy rule.
service Name of the service object referenced by an interzone policy rule.
source-mac Name of the source MAC object referenced by an interzone policy rule.
destination-mac Name of the destination MAC object referenced by an interzone policy rule.
rule enable The interzone policy rule has been enabled.
rule acl
Number of the IPv4 basic or advanced ACL referenced by an interzone policy
rule.
rule acl enable The interzone policy group referencing IPv4 ACLs have been enabled.
display interzone-policy accelerate
Use display interzone-policy accelerate to display the interzone policy acceleration status.
Syntax
display interzone-policy accelerate [ vd vd-name ] [ source sour-zone-name destination dest-zone-name ]
[ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vd vd-name: Displays the information of a VD specified by its name, which is a case-insensitive string of
1 to 20 characters excluding question mark (?), less-than sign (<), greater-than sign (>), backward slash
(\), quotation mark ("), percentage sign (%), apostrophe ('), ampersand (&), and number sign (#).If no
VD is specified, this command displays the information of the default VD, which is named Root.
source sour-zone-name: Displays the information of a source zone specified by its name, which is a string
of 1 to 20 characters. If no source zone is specified, this command displays the information of all source
zones.
destination dest-zone-name: Displays the information of a destination zone specified by its name, which
is a string of 1 to 41 characters. If no destination zone is specified, this command displays the information
of all destination zones.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.