HP VPN Firewall Appliances Access Control Command Reference

67
insert-rule-id: Specifies the ID of the rule before which the rule specified by rule-id is placed. The value
range for this argument is 0 to 65535. To move the rule to the end, set this argument to 65535.
Usage guidelines
When the insert-rule-id argument is the same as the rule-id argument or any of the rules specified by the
two arguments does not exist, no operation is performed.
Examples
# Move interzone policy rule 5 before rule 2 for the interzone instance with source zone office and
destination zone library.
<Sysname> system-view
[Sysname] interzone source office destination library
[Sysname-interzone-office-library] move rule 5 before 2
move rule acl
Use move rule acl to move an ACL in the interzone policy group.
Syntax
move rule acl acl-number before insert-acl-number
Views
Interzone instance view
Default command level
2: System level
Parameters
acl-number: Specifies the number of the IPv4 ACL to be moved. The value range for this argument is
2000 to 3999.
insert-acl-number: Specifies the ID of the IPv4 ACL before which the ACL specified by acl-number is
placed. The value range for this argument is 2000 to 3999.
Usage guidelines
When the insert-acl-number argument is the same as the acl-number argument or any of the IPv4 ACLs
specified by the two arguments does not exist, no operation is performed.
Examples
# Move IPv4 advanced ACL 3002 before IPv4 advanced ACL 3001 for the interzone instance with
source zone office and destination zone library.
<Sysname> system-view
[Sysname] interzone source office destination library
[Sysname-interzone-office-library] move rule acl 3002 before 3001
reset interzone-policy counter
Use reset interzone-policy counter to clear interzone policy information.
Syntax
reset interzone-policy counter [ vd vd-name ] { all | source sour-zone-name destination dest-zone-name }