HP VPN Firewall Appliances Access Control Configuration Guide

135
Configuring session acceleration
Session acceleration can be configured only in the Web interface.
Feature and hardware compatibility
Hardware Session acceleration com
p
atibilit
y
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
F5000-S/F5000-C No
VPN firewall modules Yes
20-Gbps VPN firewall modules No
Overview
In some specific applications, session acceleration helps improve system performance for setting up
sessions. If the outbound interface of the session initiator is not the same as the inbound interface of the
session responder, and the service configurations on the two interfaces are not the same, session
acceleration is not available.
Configuring session acceleration
1. Select Firewall > Session Table > Advanced from the navigation tree.
2. Click the Session Acceleration tab.
Figure 110 Session acceleration configuration page
3. Click the Enable session acceleration box.
4. Click Apply.
Configuration guidelines
When you configure session acceleration, pay attention to the following guidelines: