HP VPN Firewall Appliances Access Control Configuration Guide

138
Figure 112 Connection limit policies
3. Click Add to add a policy.
4. Configure the necessary parameters, and click to buffer your configuration.
5. Repeat steps 3 and 4 to configure more policies as needed.
6. Click Apply to make your settings into effect
Table 41 Configuration items
Item Descri
p
tion
Source IP Specify the source IP address, mask, and VPN.
• If you specify neither source IP address nor mask, the configuration limits the number
of connections from all hosts in the source network.
• If you do not specify any source VPN, the configuration limits the number of
connections from the host or network segment on the public network..
Source Mask
Source VPN
Destination IP Specify the destination IP address, mask, and VPN.
• If you specify neither destination IP address nor mask, the configuration limits the
number of connections to all hosts in the destination network.
• If you do not specify any destination VPN, the configuration limits the number of
connections to the host or network segment on the public network..
Destination Mask
Destination VPN
Protocol Select the protocol type for connection limit.
Max Connections Enter the maximum number of allowed connections.
Limit By
Select the criterion for connection limit:
• Source—Limits the number of connections based on source IP address.
• Destination—Limits the number of connections based on destination IP address.
• Source-destination—Limits the number of connections based on source IP address
and destination IP address.
• Subnet—Limits the total number of connections through the device.