HP VPN Firewall Appliances Access Control Configuration Guide

181
Configuration prerequisites
• Configure IP addresses for the host, firewall, and servers as shown in Figure 127 and make sure they
can reach each other.
• Configure the RADIUS server correctly to provide authentication and accounting functions for users.
Configuring the portal server
For more information about portal server configuration, see the configuration manual provided with the
portal server.
Configuring the firewall
1. Configure a RADIUS scheme:
# Create RADIUS scheme rs1 and enter its view.
<Firewall> system-view
[Firewall] radius scheme rs1
# Configure the server type for the RADIUS scheme. When using the IMC server, configure the
RADIUS server type as extended.
[Firewall-radius-rs1] server-type extended
# Specify the primary authentication server and primary accounting server, and configure the keys
for communication with the servers.
[Firewall-radius-rs1] primary authentication 192.168.0.112
[Firewall-radius-rs1] primary accounting 192.168.0.112
[Firewall-radius-rs1] key authentication simple radius
[Firewall-radius-rs1] key accounting simple radius
# Configure the access device to not carry the ISP domain name in the username sent to the
RADIUS server.
[Firewall-radius-rs1] user-name-format without-domain
[Firewall-radius-rs1] quit
2. Configure an authentication domain:
# Create ISP domain dm1 and enter its view.
[Firewall] domain dm1
# Configure AAA methods for the ISP domain.
[Firewall-isp-dm1] authentication portal radius-scheme rs1
[Firewall-isp-dm1] authorization portal radius-scheme rs1
[Firewall-isp-dm1] accounting portal radius-scheme rs1
[Firewall-isp-dm1] quit
# Configure domain dm1 as the default ISP domain for all users. Then, if a user enters a username
without any ISP domain at logon, the authentication and accounting methods of the default
domain are used for the user.
[Firewall] domain default enable dm1
3. Configure portal authentication:
# Configure a portal server on the firewall, specifying the portal server name as newpt, IP address
as 192.168.0.111, key as plaintext string portal, port number as 50100, and URL as
http://192.168.0.111:8080/portal.
[Firewall] portal server newpt ip 192.168.0.111 key simple portal port 50100 url
http://192.168.0.111:8080/portal
# Enable portal authentication on the interface connecting the host.