HP VPN Firewall Appliances Access Control Configuration Guide

15
Figure 15 Associating HTTP service with ACL 2000
Configuring the ACL at the CLI
Configuration task list
Task Remarks
Configuring a basic ACL Required.
Configure at least one task.
Configuring a basic ACL is applicable to IPv4 and IPv6.
Configuring an Ethernet frame header ACL is applicable to
IPv4.
Configuring an advanced ACL
Configuring an Ethernet frame header ACL
Copying an ACL
Optional.
Applicable to IPv4 and IPv6.
Enabling ACL acceleration for an IPv4 basic or
IPv4 advanced ACL
Optional.
Applicable to IPv4.
Configuring a basic ACL
Configuring an IPv4 basic ACL
IPv4 basic ACLs match packets based only on source IP addresses.
To configure an IPv4 basic ACL:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A