HP VPN Firewall Appliances Access Control Configuration Guide

251
Ste
p
Remarks
4. Configuring HWTACACS
accounting servers
Optional.
Specify the primary and the secondary HWTACACS accounting servers for
the HWTACACS scheme system. When the primary server is not available,
the secondary server is used. If no redundancy is needed, specify only the
primary server. For more information about the configuration procedure, see
"Configuring HWTACACS servers."
By default, no HWTACACS accounting serve
r is specified.
5. Configuring HWTACACS
parameters
Optional.
Configure the parameters that are necessary for information exchange
between the device and HWTACACS server.
Creating the HWTACACS scheme named system
To create HWTACACS scheme system:
1. Select User > HWTACACS > Server Configuration or User > HWTACACS > Parameter
Configuration from the navigation tree.
2. The page shown in Figure 152 appears, asking you to cr
eate the HWTACACS scheme.
3. Click Add.
Figure 152 Creating the HWTACACS scheme system
Configuring HWTACACS servers
1. Select User > HWTACACS > Server Configuration from the navigation tree.
Figure 153 HWTACACS server configuration
2. Configure the HWTACACS server as described in Table 52.
3. Click Apply.