HP VPN Firewall Appliances Access Control Configuration Guide

252
Table 52 Configuration items
Confi
g
uration item Descri
p
tion
Server Type
Select the type of the server to be configured, which can be Authentication
Server, Authorization Server, or Accounting Sever.
Primary Server IP
Enter the IP address of the primary server.
When no primary server is specified, the primary server IP address and the
primary server TCP port fields are empty.
If you leave the IP address field empty, any configured primary server is
removed.
The specified IP address of the primary server cannot be the same as the IP
address of the secondary server.
Primary Server TCP Port
Enter the TCP port of the primary server.
You must configure different TCP port numbers for different service types.
Secondary Server IP
Enter the IP address of the secondary server.
When no secondary server is specified, the secondary server IP and the
secondary server TCP port fields are empty.
If you leave the IP address field empty, any configured secondary server is
removed.
The specified IP address of the primary server cannot be the same as the IP
address of the secondary server.
Secondary Server TCP Port
Enter the TCP port of the secondary server.
You must configure different TCP port numbers for different service types.
Shared Key
Confirm Shared Key
Set the shared key.
The device and the HWTACACS server use shared keys to verify packets
exchanged between them. They must use the same key for a certain type of
communication.
Configuring HWTACACS parameters
1. Select User > HWTACACS > Parameter Configuration from the navigation tree.
Figure 154 HWTACACS parameter configuration
2. Configure HWTACACS parameters, as described in Table 53.