HP VPN Firewall Appliances Access Control Configuration Guide

257
Figure 156 Authentication method configuration page
2. Select the ISP domain and specify authentication methods for the domain, as described in Table
56.
3. Click Apply.
Table 56 Configuration items
Item Descri
p
tion
Select an ISP domain Select the ISP domain for which you want to specify authentication methods.
Default AuthN
Name
Secondary Method
Configure the default authentication method and secondary authentication method for
all types of users. If you do not specify any authentication method for a specific type of
users, the default authentication method applies.
Options include:
• HWTACACS—HWTACACS authentication. You must specify the HWTACACS
scheme to be used.
• Local—Local authentication.
• None—No authentication. This method trusts all users and is not for general use.
• RADIUS—RADIUS authentication. You must specify the RADIUS scheme to be used.
• Not Set—The device uses the default authentication setting, which is local
authentication.
LAN-access AuthN
Name
Secondary Method
Configure the authentication method and secondary authentication method for LAN
users.
Options include:
• Local—Local authentication.
• None—No authentication. This method trusts all users and is not for general use.
• RADIUS—RADIUS authentication. You must specify the RADIUS scheme to be used.
• Not Set—The device uses the settings in the Default AuthN area for LAN users.
IMPORTANT:
The device does not support LAN users.