HP VPN Firewall Appliances Access Control Configuration Guide

267
Figure 167 Enabling the Telnet service
8. Configure the firewall to use AAA for Telnet users.
[Firewall] user-interface vty 0 4
[Firewall-ui-vty0-4] authentication-mode scheme
[Firewall-ui-vty0-4] quit
Verifying the configuration
After the configuration, the user can Telnet to the firewall and use the configured account (username
hello@bbb and password abc) to enter the user interface of the firewall, and access all commands of
level 0 to level 3.
Local authentication/authorization configuration example for
Telnet/FTP users
Network requirements
As shown in Figure 168, configure the firewall to perform local authentication, authorization, and
accounting for Telnet users on the virtual device Root.
Figure 168 Network diagram
Configuration procedure
1. Configure a local user:
a. Select User > Local User from the navigation tree.
b. Click Add.
c. Enter the username telnet.
d. Select the access level Management.
e. Select the service type Telnet.
f. Enter the password abcd and confirm the password.
g. Select Irreversible for Password Encryption.
h. Select the virtual device Root.