HP VPN Firewall Appliances Access Control Configuration Guide

278
Ste
p
Command Remarks
11. Set the authentication timeout
time.
password-control
authentication-timeout
authentication-timeout
Optional.
60 seconds by default.
12. Set the maximum account idle
time.
password-control login idle-time
idle-time
Optional.
90 days by default.
Setting user group password control parameters
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a user group and
enter user group view.
user-group group-name N/A
3. Configure the password
aging time for the user
group.
password-control aging
aging-time
Optional.
By default, the password aging time of the user
group equals the global password aging time.
4. Configure the minimum
password length for the
user group.
password-control length
length
Optional.
By default, the minimum password length of the
user group equals the global minimum password
length.
5. Configure the password
composition policy for
the user group.
password-control
composition type-number
type-number [ type-length
type-length ]
Optional.
By default, the password composition policy of
the user group equals the global password
composition policy.
Setting local user password control parameters
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a local user and
enter local user view.
local-user user-name N/A
3. Configure the password
aging time for the local
user.
password-control aging
aging-time
Optional.
By default, the setting equals that for the user
group to which the local user belongs. If no aging
time is configured for the user group, the global
setting applies to the local user.
4. Configure the minimum
password length for the
local user.
password-control length
length
Optional.
By default, the setting equals that for the user
group to which the local user belongs. If no
minimum password length is configured for the
user group, the global setting applies to the local
user.