HP VPN Firewall Appliances Access Control Configuration Guide

27
Creating a security zone
1. Select Device Management > Zone from the navigation tree to enter the security zone management
page.
Figure 18 Security zone management page
2. Click Add.
Figure 19 Creating a security zone
3. Configure the security zone as described in Table 6.
4. Click Apply.
Table 6 Configuration items
Item Descri
p
tion
Zone ID
Specify the zone ID.
The value range depends on the device model. For more information, see Table 7.
Zone Name Specify the zone name, which cannot be any.
Preference
Set the preference of the security zone.
By default, packets traveling from a higher priority security zone to a lower priority
security zone or between two security zones of the same priority are allowed to pass.
To allow packets from a lower priority security zone to enter a higher priority security
zone, you must deploy an interzone policy. For more information about interzone
policies, see Access Control Configuration Guide.
Share Specify whether the security zone can be referenced by other VDs.