HP VPN Firewall Appliances Access Control Configuration Guide

39
Table 9 Configuration items
Item Descri
p
tion
FTP
Enable FTP
service.
Enable or disable the FTP service.
The FTP service is disabled by default.
ACL.
Associate the FTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the FTP service.
You can view this configuration item by clicking the expanding button in
front of FTP.
Telnet
Enable Telnet
service.
Enable or disable the Telnet service.
The Telnet service is disabled by default.
SSH
Enable SSH
service.
Enable or disable the SSH service.
The SSH service is disabled by default.
SFTP
Enable SFTP
service.
Enable or disable the SFTP service.
The SFTP service is disabled by default.
IMPORTANT:
When you enable the SFTP service, the SSH service must be enabled.
HTTP
Enable HTTP
service.
Enable or disable the HTTP service.
The HTTP service is enabled by default.
Port Number.
Set the port number for HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
IMPORTANT:
When you modify a port, make sure that the port is not used by another
service.
ACL.
Associate the HTTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
HTTPS
Enable HTTPS
service.
Enable or disable the HTTPS service.
The HTTPS service is disabled by default.
Certificate.
Configure the local certificate for the HTTPS service. The list displays
certificate subjects. The optional certificates are configured on the VPN >
Certificate Management page. For more information, see VPN Configuration
Guide.
IMPORTANT:
If no certificate is specified, HTTPS generates a self-signed certificate.
Port Number.
Set the port number for HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
IMPORTANT:
When you modify a port, make sure that the port is not used by other service.