HP VPN Firewall Appliances Access Control Configuration Guide

52
Item Descri
p
tion
Address Range
Specify a start IP address and an end IP address to define an address range. The
end address cannot be smaller than the start IP address.
Exclude IP Address
Specify the IP addresses to be excluded:
• Enter an IP address in the field next to the Add button, and then click Add to add
it to the excluded IP address list.
• Select one or more IP addresses in the excluded IP address list, and then click
Remove to remove them from the list.
Configuring a subnet address resource
1. Select Resource > Address > IP Address from the navigation tree.
2. Click the Subnet tab.
The subnet address resource list page appears.
Figure 45 Subnet address resource list
3. Click Add.
The page for configuring subnet address resource appears.