HP VPN Firewall Appliances Access Control Configuration Guide

66
Item Descri
p
tion
TCP
Source Port
Set the source and destination TCP port ranges in the fields. These fields are
available after you select TCP.
• To define a single port, type the same port numbers in the two fields in a row.
• To define a port range, type two different port numbers. Make sure the second
port number is greater than the first one.
Destination
Port
UDP
Source Port
Set the source and destination UDP port ranges in the fields. These fields are
available after you select UDP.
• To define a single port, type the same port numbers in the two fields in a row.
• To define a port range, type two different port numbers. Make sure the second
port number is greater than the first one.
Destination
Port
ICMP
Type
Set the ICMP message type and code. These items are available after you select
ICMP.
Table 17 lists the ICMP message names and their message types and codes.
Code
Other
Protocol
Protocol
Number
Set the protocol to be carried by IP.
This item is available after you select Other Protocol and cannot be set to 1 (for
ICMP), 6 (for TCP), or 17 (UDP).
Table 17 ICMP message names and their message types and codes
ICMP messa
g
e name T
yp
e Code
echo 8 0
echo-reply 0 0
fragmentneed-DFset 3 4
host-redirect 5 1
host-tos-redirect 5 3
host-unreachable 3 1
information-reply 16 0
information-request 15 0
net-redirect 5 0
net-tos-redirect 5 2
net-unreachable 3 0
parameter-problem 12 0
port-unreachable 3 3
protocol-unreachable 3 2
reassembly-timeout 11 1
source-quench 4 0
source-route-failed 3 5
timestamp-reply 14 0
timestamp-request 13 0
ttl-exceeded 11 0