HP VPN Firewall Appliances Access Control Configuration Guide

72
Figure 63 Time range resource configuration page
3. Configure the time range resource as described in Table 19.
4. Click Apply.
Table 19 Configuration items
Item Descri
p
tion
Name
Enter the name for the time range resource. If a time range
resource with the specified name already exists, you can add
time ranges to the time range resource. Otherwise, you can add
a new time range resource.
Periodic Time
Range
Start Time.
Set the start time of the periodic time range, in the hh:mm format
(24-hour clock).
End Time.
Set the end time of the periodic time range, in the hh:mm format
(24-hour clock). The end time must be greater than the start time.
Sun., Mon., Tues., Wed.,
Thurs., Fri., and Sat.
Select the day or days of the week on which the periodic time
range is valid.
Absolute
Time Range
From.
Set the start time of the absolute time range. The time of the day
is in the hh:mm format (24-hour clock), and the date is in the
MM/DD/YYYY format.
To.
Set the end time of the absolute time range. The time of the day is
in the hh:mm format (24-hour clock), and the date is in the
MM/DD/YYYY format. The end time must be greater than the
start time.
Configuring a time range at the CLI
Ste
p
Command Remarks
1. Enter system view.
system-view N/A