HP VPN Firewall Appliances Access Control Configuration Guide

80
Replicating an interzone policy rule
1. Select Firewall > Security Policy > Interzone Policy from the navigation tree to enter the interzone
policy rule list page, as shown in Figure 64.
2. Click the icon for a rule to enter the page for creating an interzone policy
rule based on the
existing one.
The new rule takes the settings of the existing one as its default settings. You can make changes as
desired.
3. Configure the rule as described in Table 21.
4. Click Apply.
Changing the priority of a rule
1. Select Firewall > Security Policy > Interzone Policy from the navigation tree to enter the interzone
policy rule list page.
2. Click the icon for a rule to bring up the dialog box as shown in Figure 66.
Figure 66 Modifying th
e priority of a rule
3. Enter the ID of the target rule in the field and click Apply to place the rule before the target rule.
{ If you enter 65535, the rule is placed at the end of all the rules.
{ If the target ID you enter does not exist, the rule is not moved.
Querying policies by IP address
1. Select Firewall > Security Policy > Policy Inverse Query from the navigation tree.
Figure 67 Querying policies by IP address
TIP:
Clicking the Configure Interzone Policy link goes to the interzone policy rule list page. You can also
select Firewall > Security Policy > Interzone Policy from the navigation tree to enter the page.