HP VPN Firewall Appliances Attack Protection Command Reference

31
Views
Any view
Default command level
1: Monitor level
Parameters
vd vd-name: Displays the protected IP addresses of the specified VD. The vd-name argument refers to the
VD name, a case-insensitive string of 1 to 20 characters. If you do not specify this option, this command
displays the protected IP addresses of the default VD.
Examples
# Display information about all IP addresses protected by the TCP proxy function.
<Sysname> display tcp-proxy protected-ip
Protected IP Port Number Type Lifetime(min) Rejected packets
1.1.1.1 any Dynamic 1 2
Table 6 Command output
Field Descri
p
tion
Protected IP IP address under the protection of TCP proxy.
Port Number
Destination port number of the TCP connection request.
If the value of this field is any, the TCP proxy processes all TCP
connection requests destined for the IP address.
Type
Type of the protected IP address:
• Dynamic—The entry was dynamically added by the device.
• Static—The entry was manually added.
Lifetime(min)
Remaining lifetime of the entry. If the value of this field is 0, the entry is
deleted.
Rejected packets
Number of packets matching this entry that have been dropped by the
TCP proxy function.
flow-statistics enable
Use flow-statistics enable to enable the traffic statistics collection function for a security zone.
Use undo flow-statistics enable to restore the default.
Syntax
flow-statistics enable { destination-ip | inbound | outbound | source-ip }
undo flow-statistics enable { destination-ip | inbound | outbound | source-ip }
Default
The traffic statistics collection is disabled for a security zone.
Views
Security zone view