HP VPN Firewall Appliances Attack Protection Command Reference

60
Table 10 Command output
Field Descri
p
tion
Interface Interface configured with the IPv6 packet filtering function.
In-bound Policy IPv6 ACL configured in the inbound direction of the interface.
Out-bound Policy IPv6 ACL configured in the outbound direction of the interface.
acl6 IPv6 ACL number.
0 packets, 0 bytes, 0% permitted
Statistics for packets permitted by IPv6 ACL rules: the number of
packets and bytes, and the percentage of the permitted to the
total.
0 packets, 0 bytes, 0% denied
Statistics for packets denied by IPv6 ACL rules: the number of
packets and bytes, and the percentage of the denied to the total.
0 packets, 0 bytes, 0% permitted default
Statistics for packets that matched no IPv6 ACL rule and were
permitted according to the default filtering rule: number of
packets and bytes, and the percentage of the permitted to the
total.
0 packets, 0 bytes, 0% denied default
Statistics for packets that matched no IPv6 ACL rule and were
denied according to the default filtering rule: number of packets
and bytes, and the percentage of the denied to the total.
Totally 0 packets, 0 bytes, 0% permitted
Statistics for all permitted packets: the number of packets and
bytes, and the percentage of all the permitted to the total.
Totally 0 packets, 0 bytes, 0% denied
Statistics for all denied packets: the number of packets and
bytes, and the percentage of all the denied to the total.
firewall ipv6 default
Use firewall ipv6 default to specify the default firewall filtering action of the IPv6 firewall.
Use undo firewall ipv6 default deny to specify the default firewall filtering action as permit.
Syntax
firewall ipv6 default { deny | permit }
undo firewall ipv6 default deny
Default
IPv6 firewall permits packets to pass.
Views
System view
Default command level
2: System level
Parameters
deny: Specifies the filtering action as denying packets to pass the firewall.
permit: Specifies the filtering action as permitting packets to pass the firewall.