HP VPN Firewall Appliances Attack Protection Command Reference

62
name acl6-name: Specifies the name of a basic or an advanced IPv6 ACL. The ACL name is a
case-insensitive string of 1 to 32 characters that must start with an alphabetical character. To avoid
confusion, do not specify the word all for the ACL name.
inbound: Filters inbound packets.
outbound: Filters outbound packets.
Usage guidelines
You can apply only one IPv6 ACL in one direction of an interface for packet filtering.
Examples
# Apply IPv6 ACL 2500 to GigabitEthernet 0/1 to filter outbound packets.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] firewall packet-filter ipv6 2500 outbound
reset firewall ipv6 statistics
Use reset firewall ipv6 statistics to clear the packet filtering statistics of the IPv6 firewall.
Syntax
reset firewall ipv6 statistics { all | interface interface-type interface-number }
Views
User view
Default command level
1: Monitor level
Parameters
all: Clears the packet filtering statistics on all interfaces of the IPv6 firewall.
interface interface-type interface-number: Clears the packet filtering statistics on the specified interface of
the IPv6 firewall.
Examples
# Clear the packet filtering statistics on GigabitEthernet 0/1 of the IPv6 firewall.
<Sysname> reset firewall ipv6 statistics interface gigabitethernet 0/1
Related commands
display firewall ipv6 statistics
ASPF configuration commands
display port-mapping
Use display port-mapping to view port mapping information.
Syntax
display port-mapping [ application-name | port port-number ] [ vd vd-name ] [ | { begin | exclude |
include } regular-expression ]