HP VPN Firewall Appliances Attack Protection Command Reference

2
undo attack-defense logging enable
Default
Attack protection logging is disabled.
Views
System view
Default
2: System level
Examples
# Enable attack protection logging.
<Sysname> system-view
[Sysname] attack-defense logging enable
attack-defense policy
Use attack-defense policy to create an attack protection policy and enter attack protection policy view.
Use undo attack-defense policy to delete an attack protection policy.
Syntax
attack-defense policy policy-number [ zone zone-name ]
undo attack-defense policy policy-number [ zone zone-name ]
Default
No attack protection policy exists.
Views
System view, VD system view
Default command level
2: System level
Parameters
policy-number: Specifies sequence number of an attack protection policy, in the range of 1 to 128.
zone zone-name: Specifies the security zone that uses the policy exclusively. The zone-name argument
represents a security zone name, a case-insensitive string of 1 to 20 characters. If you specify a security
zone, the policy is applied to only the specified security zone. Otherwise, the policy is applied to multiple
security zones.
Examples
# Create attack protection policy 1.
<Sysname> system-view
[Sysname] attack-defense policy 1
[Sysname-attack-defense-policy-1]
blacklist enable
Use blacklist enable to enable the blacklist function.